Filter
Top Products
9 - 14
9
e-STUDIO350/352/353/450/452/453
PAPER FEEDING SYSTEM
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-417
Fig. 9-419
Fig. 9-418
Fig. 9-420
Sensor arm
Bypass paper
sensor
Screw
Bypass feed upper cover
Screw
Screw
Bypass drive unit
(A-5) Bypass paper sensor
(1)
Take off the bypass unit ( Chapter 9.4 (A-1)).
(2) Take off the bypass feed upper cover
( Chapter 9.4 (A-4)).
(3)
Take off the upper plate ( Chapter 9.4 (A-4)).
(4) Take off the spring and sensor arm.
(A-6) Bypass pickup roller
(1)
Take off the bypass unit ( Chapter 9.4 (A-1)).
(2) Remove 1 screw and take off the bypass
feed upper cover .
(3) Remove 4 screws and take off the bypass
drive unit.
Spring
(5) Disconnect the connector from the sensor
and release the latch to take off the bypass
paper sensor.