Toshiba 353 All in One Printer User Manual


  Open as PDF
of 302
 
e-STUDIO350/352/353/450/452/453
DRUM RELATED SECTION
11
11 - 13
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 11-617
Fig. 11-616
(D-2) Recovery blade
(1) Remove the cleaning blade ( Chapter
11.6 (D-1)).
(2) Remove the recovery blade.
Notes:
1. When attaching the recovery blade, clean the
surfaceoftheframerst.Becarefulnotto
deform the blade.
2. Attach the recovery blade while pushing it to
the step on the surface of the frame.
3.Pressthestuckpartwithyourngertoattach
the blade securely.
(D-3) Separation nger
(1) Remove the drum ( Chapter 11.6 [C]).
(2) Releasethe3separationngers.
Notes:
1. Whenreplacingtheseparationngers,
make sure that the drum has been taken off
rstsincethengersmayscratchthedrum
surface.
2. Whentheseparationngershavebeenre-
placed, check if their pressure movement is
normalbymovingthemwithyourngers.
[E] Transfer / Separation charger
(E-1) Transfer / Separation charger
(1) Open the bypass tray, ADU and jam access
cover.
(2) Release the latches and take off the transfer
and separation chargers.
Note:
When installing the transfer and separation char-
gers, make sure not to deform the springs.
Fig. 11-618
 previous next