Filter
Top Products
e-STUDIO350/352/353/450/452/453
DEVELOPMENT SYSTEM
12
12 - 11
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 12-513
Fig. 12-514
Fig. 12-515
[D] Auto-toner sensor
(1) Discharge the developer material
( Chapter 12.5 (B-1)).
(2) Disconnect 1 connector on the bottom of the
developer unit.
(3) Remove 1 screw and take off the auto-toner
sensor.
[E] Drum thermistor
(1) Discharge the developer material
( Chapter 12.5 (B-1)).
(2) Take off the front cover of developer unit
(
Chapter 12.5 (C-1)).
(3) Remove 2 screws and take off the developer
sleeve cover.
(4) Remove 1 screw and take off the drum
thermistor.