Filter
Top Products
6-25
EM18-33010A
6. DIAG. TEST OPERATION
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables
a fast forward.
2. A changed font code is stored in memory by pressing the [PAUSE] key.
• PC-850
• PC-8
6.3 PARAMETER SETTING MODE
6.3.6 Character Code Selection
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE]
key.
Press the [FEED] key.
Press the [PAUSE] key seven times.
Select either character code with
the [FEED] key or [RESTART]
key. (See NOTE 1.)
Press the [FEED] key
and [RESTART] key
at the same time.
Press the [PAUSE] key.
Continued on Section 6.3.7
Font zero selection.
<
1 DIAGNOSTIC V1.OA
>
<
2 PARAMETER SET
>
FO T CODE PC-850N