Filter
Top Products
6-26
EM18-33010A
6. DIAG. TEST OPERATION
• 0 (without slash)
• ø (with slash)
NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables
a fast forward.
2. A changed zero font is stored in memory by pressing the [PAUSE] key.
6.3 PARAMETER SETTING MODE
6.3.7 Font Zero Selection
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
Press the [FEED] key.
Press the [PAUSE] key eight times.
Select either zero font with the
[FEED] key or [RESTART]
key. (See NOTE 1.)
Press the [FEED] key
and [RESTART] key
at the same time.
Press the [PAUSE] key.
Continued on Section 6.3.8
Control code selection.
<
1 DIAGNOSTIC V1.OA
>
<
2 PARAMETER SET
>
ZE O FONT 0R