Filter
Top Products
2-2
2. SPECIFICATIONS
EM1-33035
2.3 Media
Type
Width
Length
Outer diameter
Spool type
68 mm ~ 134 mm
600 m
ø90 mm (max.)
2.4 Ribbon
NOTES: 1. "On the fly issue" means that the printer can draw and
print without stopping between labels.
2. To ensure print quality and print head life use only
TOSHIBA TEC specified media and ribbons.
3. When using the cutter ensure that label length B plus
inter label gap length E exceeds 35 mm. (i.e. label
pitch should be greater that 35 mm.)
4. When rewinding the media onto the take-up spool in
batch mode, the max. outer roll diameter should be 180
mm.
5. Use of rough media for the ribbon saving issue may
cause ribbon smudges.
I I
H
H
G
G
D
C
C
1
1
2
2
A
A
F
B
E
Stop
position
Cut
position
Label
Reference
coordinate
Reference
coordinate
Stop
position
Cut
position
Feed direction
Tag paper
Black Mark
(on reverse side)
Tag paper
Reference
coordinate
Reference
coordinate
J
Refer to the following
NOTE 2.
Black Mark
(on reverse side)
2.3 Media
NOTES: 1. The media specification other than above are unchanged.
2. When marking black marks on label rolls, the following requirements must be satisfied.
When the gap length is less than 4 mm:
The black mark length should be longer than the gap length.
When the gap length is 4 mm or more:
The black mark should not overlap the gap for more than 4 mm and the following label.
Fig. 2-1
25.4 ~ 999.0
23.4 ~ 997.0
50.8 ~ 140.0
47.8 ~ 137.0
2.0 ~ 20.0
2.0 ~ 10.0
10.0 ~ 128.0
21.4 ~ 298.6
21.4 ~ 995.0
23.4 ~ 298.6
23.4 ~ 997.0
1.0
Refer to the following NOTE 2.
149.3
661.3
ø200 Max.
0.13 ~ 0.17
0.15 ~ 0.29
A : Span of one label/tag
B : Label/tag length
C : Width including backing paper
D : Label width
E : Gap length
F : Black mark length (Tag paper)
G : Effective print width
H :
I : Print speed up/slow down area
J : Black mark length (Label)
Maximum effective length
for on the fly issue
Outer roll diameter
Thickness
10.0 ~ 999.0
8.0 ~ 997.0
2.0 ~ 20.0
6.0 ~ 298.6
6.0 ~ 995.0
8.0 ~ 298.6
8.0 ~ 997.0
Label: 38 ~ 999.0
Tag: 25.4 ~ 999.0
25.0 ~993.0
6.0 ~ 20.0
23.0 ~ 298.6
23.0 ~ 991.0
234.0 ~ 298.6
23.4 ~ 997.0
Label dispensing mode
Item
Batch mode
Strip mode
Cut mode
[Unit : mm]
Label Standard
Max. memory
TAG Standard
Max. memory
Effective print
length
Standard
Max. memory
Label
Tag