Filter
Top Products
1-5
1. OUTLINE OF THE SYSTEM
EM10-33006A
3 Auto cut mechanism
When the cutter module is installed, the backing paper and tag paper are cut individually (stop
and cut). Minimum cut length is 25.4 mm (tag paper) or 38 mm (label).
(Revision Date: Feb. 10. 2000)
1.5 ELECTRONICS SPECIFICATIONS
Fig. 1-5
18) Power supply
QQ model: AC 100 ~ 120 V + 10%, -15%, 50/60Hz ± 2Hz
QP model: AC 220 ~ 240 V + 10%, -15%, 50Hz ± 2Hz
19) Current consumption
Printing: 198 W max., QQ model: 2 A max., QP model: 1 A max.
(Stand by: 51 W, QQ model: 500 mA, QP model: 250 mA)
20) Rush current ...... 30A or less
1.5 ELECTRONICS SPECIFICATIONS
1) CPU ................... µPD70236AGD-16-588
2) Memory
1 Program + Character generator: Flash ROM 1 MB
2 Backup: EE-PROM 128 Bytes
3 Image buffer + Work: D-RAM 2MB (max. 4MB: option)
3) Interface
1 RS-232C interface
(1) Communication mode: Full-duplex
(2) Transmisson speed: 2400,4800,9600,19200 BPS (selectable)
(3) Synchronization: start-stop synchronization
(4) Transmission parameter
■ Parity: None, EVEN, ODD
■ Start bit: 1-bit
■ Stop bit: 1-bit or 2-bit
■ Word length: 7-bit or 8-bit
Cutter
Ribbon
Print Head
Platen
Paper
Sensor
Feed
Roller
Pinch
Roller
Ribbon End
Sensor
Tag