Toshiba M1 Laptop User Manual


 
3.21 Bluetooth Test 3 Tests and Diagnostics
TECRA M1 Maintenance Manual (960-436) 3-57
Table 3-2 Error code for Bluetooth test (BD_ADDR) (2/2)
Error code Meaning
0x20 Unsupported LMP Parameter Value.
0x21 Role Change Not Allowed.
0x22 LMP Response Timeout.
0x23 LMP Error Transaction Collosion.
0x24 LMP PDU Not Allowed.
0x25 Not Exist
0x26 Not Exis t
0x27 Not Exist
0x28 Not Exist
0x29 Not Exist
0x2a Not Exist
0x2b Not Exist
0x2c Not Exist
0x2d Not Exist
0x2e Not Exist
0x2f Not Exist
** See the Specification of the Bluetooth System in detail.
Subtest 02 Communication test (DUT mode)
This subtest checks the Bluetooth communication functions. Preparing the tester machine for the
Bluetooth test program. Insert a floppy disk containing the test program into the tester machine and
turn on the tester machine. The Bluetooth test menu will appear:
Press 3 to select the test and press Enter in the target machine. The following message will appear:
When the test begins, the machine displays BD_ADDR of the DUT. The progress bar stops when
the test is completed. The following message is displayed.
----------------------------------------------------------------------------
-
Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX Copyright (C) by TOSHIBA Co.
----------------------------------------------------------------------------
-
+----------------------+
| DUT | BD_ADDR of the DUT = XXXXXXXXXXXXX [h]
+----------------------+
Ready>>>>>>>>>>>>>>>>>>>>>> <- Progress Bar
[ESC] : Stop