Filter
Top Products
3.29 SETUP 3 Tests and Diagnostics
TECRA M1 Maintenance Manual (960-436) 3-93
11. PCI Bus
This item displays the interrupt level for the Card Bus. It is for information only and cannot
be changed.
PCI BUS = IRQ11
12. PC Card
This option sets the PC Card Controller mode. This option can be changed when “Device
Config.” is set to “All Devices”.
Auto-Selected Use this setting for all PC Cards when OS supports Plug&Play.
(Default)
PCIC Compatible Use this setting for PCIC compatible PC card.
CardBus/16-bit Use this setting when CardBus does not work properly in
Auto-Selected”, or PC card supports 16-bit.
13. Peripheral
Use this option to select the parallel port mode and hard disk mode.
(a) Internal Pointing Device
This option enables and disables the Touch Pad.
Enabled Enables the Touch Pad. (Default)
Disabled Disables the Touch Pad.
(b) Ext Keyboard "Fn"
Use this option to set the Fn key equivalent when you are using an external
keyboard. Selecting this option displays the following subwindow.
Enabled Enables the feature.
Use this option to set a key combination on an external keyboard to emulate the Fn
key on the computer's internal keyboard. Setting an Fn key equivalent will enable
Ext Keyboard "Fn" key equivalent
= Left Ctrl + Left Alt
KEYBOARD