Filter
Top Products
3.27 Floppy Disk Drive Utilities 3 Tests and Diagnostics
TECRA M1 Maintenance Manual (960-436) 3-75
4. DUMP program
(a) When DUMP is selected, the following message appears:
DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX
Drive type select (1:FDD, 2:HDD) ?
(b) When FDD is selected, the following message appears. Select a format type number.
When HDD is selected, the display will go to step (g).
Select drive number (1:A, 2:B) ?
(c) Select a drive number and the following message will be displayed.
Format type select (1:2DD, 2:2HD) ?
(d) Select a media type number and the following message will appear:
Insert source disk into drive A:
Press any key when ready.
(e) Insert a source disk and press any key and the following message will appear:
--- Max. address ---
[ Track ] = XXXX
[ Head ] = XX
[ Sector ] = XX
Track number ??
(f) Set the track number, head number and sector number you want to dump. The system
will access the disk and dump a list and the following message appears. Select 3 to end
the list display.
Press number key (1:up, 2:down, 3:end) ?
(g) When HDD is selected in step (a), the following message appears.
Select drive number (1:C, 2:d) ?
(h) Select a drive number. Then the following message appears.
--- Max. address ---
[ LBA ] = XXXX
LBA number ????????
(i) Enter a LBA number, Then the system accesses the disk and dumps a list.
(j) The following message appears. Select 3 to end the list display.
Press number key (1:up, 2:down, 3:end) ?