Filter
Top Products
4.25 Fluorescent Lamp 4 Replacement Procedure
TECRA M1 Maintenance Manual (960-436) 4-105
5. Turn the bezel face down, and remove the two screws (E) fixing the lamp cover (F) and
remove the lamp cover. Then replace the lamp unit (G) with a new one.
Screw tightening torque:
0.1078N
•
m (1.1kgf
•
cm)
(E)
(E)
(F) Lamp cover
(G) Lamp unit
Figure 4-66 Replacing Sharp fluorescent lamp (SXGA+) (5)