Filter
Top Products
4 Replacement Procedures 4.21 Display Mask
4-66 TECRA M1 Maintenance Manual (960-436)
4.21 Display Mask
Removing the Display Mask
To remove the display mask, follow the steps below and refer to figures 4-36 and 4-37.
1. Remove the two mask seals at the lower part of the display mask.
2. Remove the following screws securing the display mask.
• M2.5×6 FLAT HEAD screw ×2
M2.5×6 FLAT HEAD screw
Mask seals
Display mask
Figure 4-36 Removing the Display mask (1)