Filter
Top Products
4 Replacement Procedure 4.25 Fluorescent Lamp
4-106 TECRA M1 Maintenance Manual (960-436)
6. Install the lamp cover (F) and secure it with the two screws (E).
NOTE: Be careful not to make the lamp cover over the fitting pin. Around the
pulling-out part of the lead wire, attach so that the P chassis is outside.
Screw tightening torque:
0.1176N
•
m (1.2kgf
•
cm)
(E)
(E)
(F) Lamp cover
Figure 4-67 Replacing Sharp fluorescent lamp (SXGA+) (6)