Filter
Top Products
4.22 FL Inverter 4 Replacement Procedures
TECRA M1 Maintenance Manual (960-436) 4-69
4.22 FL Inverter
Removing the FL Inverter
To remove the FL inverter, follow the steps below and refer to figure 4-38.
1. Remove the following screw securing the FL inverter.
• M2×3 SUPER FLAT screw ×1
2. Disconnect the FL cable under the insulator from the FL inverter.
3. Disconnect the HV cable from the FL inverter.
4. Remove the FL inverter.
M2×3 SUPER FLAT screw
FL inverter
FL cable
HV cable
Figure 4-38 Removing the FL inverter