Filter
Top Products
4.5 HDD 4 Replacement Procedures
TECRA M1 Maintenance Manual (960-436) 4-19
NOTE: The following steps describe how to disassemble the HDD pack; however, do not
disassemble if the HDD is working properly.
5. Place the HDD pack on a flat surface, and remove the following screws.
• M3×4 FLAT screw ×4
6. Remove the HDD bracket.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
HDD bracket
M3×4 FLAT screw
M3
×
4 FLAT screw
Figure 4-6 Removing the HDD bracket