Filter
Top Products
4.7 Modem Daughter Card 4 Replacement Procedures
TECRA M1 Maintenance Manual (960-436) 4-25
4.7 Modem Daughter Card
Removing the Modem Daughter Card
To remove the modem daughter card, follow the steps below and refer to figure 4-9 and 4-10.
1. Remove the following screw securing the modem daughter card cover. Insert your finger
into the slot and remove the cover by lifting it up from the side of screw hole.
• M2.5×4 FLAT HEAD screw ×1
Modem daughter card cover
M2.5×4 FLAT HEAD screw
Slot
Figure 4-9 Removing the Modem daughter card cover