Control Panel Menus
Phaser 6140 Color Laser Printer
User Guide
100
USB Setup Menu
Use this menu to configure the USB port status.
Protocol When a protocol is set to Enable, it can be used. When set to Disable, it
cannot be used.
• LPR
• Port 9100
• IPP
• SMB TCP/IP
• SMB NetBEUI
• FTP
• WSD
• SNMP
• Email Alerts
• CentreWare IS
• Bonjour (mDNS)
Host Access List Limits the IP addresses that can access this printer.
Reset Defaults Resets all network settings back to their factory defaults.
Adobe Protocol Specifies the PostScript communication protocol to use:
• Standard
• BCP
• TBCP
• Binary
• Auto
Item Description
Port Status Use to enable or disable the USB port status. This port must be enabled for
you to print to a USB-connected printer.
• Enable
• Disable
Adobe Protocol Specifies the PostScript communication protocol to use:
• Standard
• BCP
• TBCP
• Binary
• Auto
Item Description