Filter
Top Products
Control Panel Menus
Phaser 6140 Color Laser Printer
User Guide
105
Symbol Set Specifies the font to use for symbols. The default is Roman-8.
Font Size Specifies the font size. The default size is 12.00. You can specify a value
between 4.00 and 50.00 in increments of 0.25. Available only for
typographic fonts.
Font Pitch Specifies the character spacing. You can specify a value between 6.00 and
24.00 in increments of 0.01. The default is 10.00.
Form Line Specifies the form line (the number of lines per form). You can specify a
value between 5 and 128 in increments of 1. The default is 60.
Quantity Specifies the number of copies to print. You can specify a value between 1
to 999. The default is 1.
Image Enhance Selects whether to perform image enhancement.
The image enhancement feature makes the boundary line between black
and white smoother to decrease jags and enhance the visual appearance.
• On (default)
• Off
Hex Dump Specifies whether to print the data sent from a computer in the ASCII code
corresponding to the hexadecimal notation format in order to check the
data contents.
• Enable
• Disable (default)
Draft Mode Specifies whether to print in draft mode.
• Enable
• Disable (default)
Line Termination Allows the administrator to manually configure what line endings will be
used when printing PCL or text files.
• Off: Line termination commands are not added.
• Add-LF: The Line Feed command is added.
• Add-CR: The Carriage Return command is added.
• CR-XX: The Line Feed and Carriage Return commands are both added.
Default Color Specifies the default color mode:
• Black (default)
• Color
Item Description