Filter
Top Products
Installation and Setup
Phaser 6140 Color Laser Printer
User Guide
46
4. To enable the items that are installed in your printer, select the item in the list and then, in the
Settings for: drop-down list, select Available. If you are enabling additional memory, then in
Memory Capacity, select the amount of RAM in MB from the list.
5. Click OK.
Enabling Optional Features for Macintosh
This section includes:
• Enabling Optional Features for Macintosh OS X Version 10.3 on page 46
• Enabling Optional Features for Macintosh OS X Versions 10.4 and 10.5 on page 46
Enabling Optional Features for Macintosh OS X Version 10.3
1. From the Applications folder or from the dock, open System Preferences.
2. Open Print & Fax. The list of printers appears on the left of the window.
3. In the Printer list, select your printer and then click the Show Info icon in the top row of the
window.
4. In the Printer Info window, from the first drop-down list, select Installable Options.
5. Select all that apply:
• If you have added the optional additional memory, select the amount of total memory from
the Memory list.
• If you have the optional 250-sheet feeder installed (Tray 2), then select 2-Tray from the Paper
Tray Configuration list.
• If you have enough memory to use the RAM Disk function (minimum 512 MB required), select
the RAM Disk check box.
• If the duplex unit is installed, select the Duplex Unit check box.
6. Click the Apply Changes button.
7. Close the window.
Enabling Optional Features for Macintosh OS X Versions 10.4 and 10.5
These instructions apply to Macintosh OS X version 10.5. If your version of OS X is 10.4, the steps may
vary slightly.
1. From the Applications folder or from the dock, open System Preferences.
2. Open Print & Fax. The list of printers appears on the left of the window.
3. Select your printer in the list and then click the Options & Supplies button.
4. In the window, click the Driver tab and select the printer’s driver from the Print Using list.
5. Enable the installed features:
• To specify the amount of RAM memory available, select the amount of memory from the drop-
down Memory Capacity list.
• To enable the optional 250-sheet feeder, click Paper Tray Configuration and select 2-Tray
from the drop-down list.
• If you have enough memory to use the RAM Disk feature (minimum of 512 MB required),
select Available from the RAM Disk drop-down list.