Filter
Top Products
Installation and Setup
Phaser 6140 Color Laser Printer
User Guide
45
5. Enable the installed features:
• To specify the amount of RAM memory available, click Memory and then select the amount of
memory from the drop-down list.
• To enable the 250-sheet feeder, click Paper Tray Configuration and select 2-Tray from the
drop-down list.
• If you have enough memory to use the RAM Disk feature (minimum of 512 MB required), click
RAM Disk and select Available from the drop-down list.
• To enable the duplex unit, click Duplex Unit and select Available from the drop-down list.
6. Click OK.
Enabling Optional Features for the Windows PCL Driver
This section includes:
• Enabling Optional Features for a Network-Connected Printer on page 44
• Enabling Optional Features for a USB Cable-Connected Printer on page 44
Enabling Optional Features for a Network-Connected Printer
1. Navigate to your computer’s list of printers:
• For Windows XP, click Start > Settings > Printers and Faxes.
• For Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.
• For Windows 2000 and Windows Server 2003, click Start > Settings > Printers.
• For Windows Server 2008, click Start > Settings > Printers.
2. In the list of printers, right-click the Phaser 6140 PCL printer and select Properties.
3. In the Properties dialog box, click the Options tab.
4. Click the Get Information from Printer button.
The printer’s IP address should appear in the Network Address section, the installed optional
features should be listed as Available in the Items list, and the amount of memory installed should
appear in the Memory Capacity field.
5. Click OK.
Enabling Optional Features for a USB Cable-Connected Printer
1. Navigate to your computer’s list of printers:
• For Windows XP, click Start > Settings > Printers and Faxes.
• For Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.
• For Windows 2000 and Windows Server 2003, click Start > Settings > Printers.
• For Windows Server 2008, click Start > Settings > Printers.
2. In the list of printers, right-click the Phaser 6140 PCL printer and select Properties.
3. In the Properties dialog box, click the Options tab.
The Items box lists the printer options. To the right of each item is the status, either Available or
Not Available, or in the case of Memory Capacity, the amount of RAM in MB.