Filter
Top Products
Control Panel Menus
Phaser 6140 Color Laser Printer
User Guide
102
Auto Log Print Specifies whether to automatically print a Job History Report after 22 print
jobs.
• Off (default): Prevents the Job History Report from printing
automatically even if the number of print jobs exceeds 22.
• On: Automatically prints a report when the number of print jobs reaches
22.
Notes:
• You cannot set this during printing.
• After changing this setting, turn off the printer and then turn
it on again to activate the change.
Print ID Prints the user ID in the specified place on the printed page.
• Off (default): The user ID is not printed.
• Top Left: Prints the user ID on the top left of the page.
• Top Right: Prints the user ID on the top right of the page.
• Bottom Left: Prints the user ID on the bottom left of the page.
• Bottom Right: Prints the user ID on the bottom right of the page.
Print Text Specifies whether the printer outputs unsupported PDL data as text when
the printer receives it. Text data is printed on A4- or Letter-size paper.
RAM Disk This feature is available when the printer’s memory is expanded from 256
MB to at least 512 MB RAM.
Allocates memory to the RAM Disk file system for the Secure Print, Collating
Jobs, and Proof Print, Form Overlay, and Font Download features.
• Enable
• Disable (default)
Size Mismatch Specifies how the printer reacts when it detects a difference between the
size of paper specified at the control panel and the size loaded in the
specified destination tray. Or, in the case where the paper in the specified
tray runs out, the printer will select the substitute tray based on the Size
Mismatch settings.
When a Paper Type other than None is selected in the printer driver, it
overwrites the Size Mismatch setting on the control panel.
• Off (default): The printer will prompt you to select a tray for printing.
• Larger Size: The printer will use a tray that has paper larger than the
size specified for the print job but will print the page at 100%
magnification.
• Nearest Size: The printer will use a tray that has paper nearest to the
size specified in the print job. The page will print at 100%
magnification.
mm/inch Specifies the units of measurement to use for the custom paper sizes:
• Millimeters (mm)
• Inches
Default Size Specifies the default paper size as either A4 or Letter.
Item Description