Xerox 6140 Printer User Manual


 
Troubleshooting
Phaser 6140 Color Laser Printer
User Guide
129
Error Messages
XXX Low The toner in the specified cartridge is low and will need to be replaced
soon.
Purchase a new cartridge. For details, see Ordering Supplies on page 114.
Waste Full
XXX Cartridge
Replace the specified toner cartridge.
Tray XXX Empty The specified tray is out of paper. Open the tray, insert paper, and then
close the tray.
Message Condition/Reason/Action
Fuser Error
Error 010-397
Check that the fuser is seated correctly, then restart the printer.
Check Unit
Imaging Unit
Sealing tape is still attached to the imaging unit. Remove the tape.
Over Heat
Please Wait
Error 042-700
Please Wait
The printer’s internal temperature is too high.
The printer has been stopped.
Wait 1 hour before restarting the printer. Ensure the printer has adequate
cooling space around it, and that the cooling vents are not blocked.
Jam at Tray 1
Check Tray 1
Open Front Cover
Paper is jammed inside the paper tray.
Remove the jammed paper and then open and close the front cover. For
details, see Clearing Jams at Tray 1 on page 147.
Jam at Tray 2
Check Tray 2
Open Front Cover
Paper is jammed inside the paper tray.
Open Tray 2 and remove the jammed paper.
Open and close the front cover. For details, see Clearing Jams at the 250-
Sheet Feeder on page 149.
Chk Manual Feed
Remove Paper
Open and close Front Cover
There is a jam at the manual feed slot. Remove the paper and then open
and close the front cover. For details, see Clearing Jams at the Manual Feed
Slot on page 148.
Remove paper from Manual
Feed
Remove the paper at the manual feed slot.
Jam at Front Cover
Open Front Cover and Remove
Paper
Paper is jammed inside the printer.
Press the button to open the front cover and then remove the jammed
paper.
Jam at Duplexer
Open Front Cover
Lift Transfer Unit
There is a paper misfeed at the duplex unit.
Press the button to open the front cover and then remove the jammed
paper. For details, see Clearing Jams at the Duplex Unit on page 150.
Code/Message Condition/Reason/Action