Filter
Top Products
Installation and Setup
Phaser 6140 Color Laser Printer
User Guide
36
9. Press the Back Arrow button once to return to the IPv4 menu and then arrow down to IP Address
and press OK.
You use the Up, Down, Back and Forward Arrow buttons to select the IP address. When undefined,
the address is 000.000.000.000. Beginning with the first bank of numbers, use the following
method to select the IP address:
10. Press the Up Arrow button to scroll through the numbers until you reach the desired number, then
press the Forward Arrow button once to go to the next bank of numbers. Repeat the process: press
the Up Arrow button until you reach the desired number, then press the Forward Arrow button
once to move to the next bank, etc. To scroll down through the numbers, press the Down Arrow
button. To scroll quickly to a high number, hold down the arrow button. To go back to a bank of
numbers, press the Back Arrow button.
11. When finished, press OK to confirm the address.
12. Press the Back Arrow button once and then press the Down Arrow button to go to Network Mask
and then press OK. Repeat steps 10 and 11 to select the Network Mask address.
13. Press the Back Arrow button once and then press the Down Arrow button to go to Gateway
Address and then press OK. Repeat steps 10 and 11 to select the Gateway Address.
14. Print the Configuration page to verify the new settings. For details, see Configuration Page on
page 25.
15. You are ready to install software. Go to Installing the Printer Drivers on page 38.
See also:
Online Support Assistant at www.xerox.com/office/6140support
Changing the IP Address Using CentreWare IS
To change the printer’s IP address using CentreWare IS:
1. Launch your computer’s Web browser and then type the printer’s IP address into the browser’s
Address field using this format: http://xxx.xxx.xxx. Type the address separating the groups of
numbers by periods. If the address only has two numbers in a group instead of three, then enter
only those two numbers; do not enter a zero as a placeholder.
2. On the right side of the page, click the Properties button.
3. In the navigation pane on the left of the page, expand the Protocols link if it is not already
expanded, then click TCP/IP.
4. The TCP/IP - IPv4 page opens. In the middle box, make the desired changes. For example, to
change the way the printer acquires the IP address, in the Get IP Address field, select a method
from the drop-down list.
5. When done making changes, scroll to the bottom of the page and click the Save Changes button.