Filter
Top Products
Control Panel Menus
Phaser 6140 Color Laser Printer
User Guide
101
System Setup Menu
Use this menu to configure the printer’s general operation settings. For example, time to power saver
mode, alarm settings, etc.
Item Description
PowerSaver Time Specifies the length of time, from 5 to 60 minutes, that the printer is idle
before going into Power Saver mode. For details on setting the Power Saver
Time, see Setting the Power Saver Time on page 24.
Audio Tones Specifies whether an alarm sounds when one of the following printer errors
or actions occurs. These are set to Off by default. The volume cannot be
adjusted.
• Control Panel
• Invalid Key
• Machine Ready
• Job Complete
• Fault Tone
• Alert Tone
• Out of Paper
• Low Toner Alert
• Base Tone
Fault Time-Out Specifies the amount of time that passes before the printer automatically
deletes a print job when a there has been a job error.
Set the default time-out, up to 60 seconds, in one-second increments.
Time-Out Automatically cancels a print job when it goes beyond a specified period of
time. Set the duration allowed for the print time. When the time expires,
the print job is canceled. Duration can be set for up to 30 minutes in one-
minute increments.
Language Specifies the language used in the control panel menus and in printed
Information pages.