Filter
Top Products
Installation and Setup
Phaser 6140 Color Laser Printer
User Guide
30
Installation and Setup Overview
Before using the printer, you must:
1. Make sure the printer is set up correctly in an appropriate location. For details, see Choosing a
Location for the Printer on page 31.
2. Select a connection method. For details, see Choosing a Connection Method on page 32.
3. Make sure the printer is connected correctly. For details, see Connecting the Printer on page 32.
4. Turn on the printer and the computer. The printer’s Configuration page should print by default. If it
does not, see Configuration Page on page 25. If you are connected to a network, keep the
Configuration page for referencing network settings such as your printer’s IP address.
5. If connected to a network, configure network settings. For details, see Configuring Network
Settings on page 34.
6. Install drivers and software utilities from the Software and Documentation CD. The software
installation procedure used depends on your connection type (network or USB). For details, see
Installing the Printer Drivers on page 38.
Note: If the Software and Documentation CD is not available, you can download the latest drivers
from www.xerox.com/office/6140drivers.