Filter
Top Products
Installation and Setup
Phaser 6140 Color Laser Printer
User Guide
44
Enabling Optional Features
This section includes:
• Enabling Optional Features for the Windows PostScript Driver on page 44
• Enabling Optional Features for Macintosh on page 46
• Enabling Optional Features for Linux on page 47
If your printer includes the duplex unit (Phaser 6140/DN printer configuration), 250-sheet feeder, RAM
Disk, or extra memory, you must enable these options in each printer driver before you can use these
features.
Enabling Optional Features for the Windows PostScript Driver
This section includes:
• Enabling Optional Features for a Network-Connected Printer on page 44
• Enabling Optional Features for a USB Cable-Connected Printer on page 44
Enabling Optional Features for a Network-Connected Printer
1. Navigate to your computer’s list of printers:
• For Windows XP, click Start > Settings > Printers and Faxes.
• For Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.
• For Windows 2000 and Windows Server 2003, click Start > Settings > Printers.
• For Windows Server 2008, click Start > Settings > Printers.
2. In the list of printers, right-click the Phaser 6140 PS printer and select Properties.
3. Click the Configuration tab and then click the Get Information from Printer button.
The printer’s IP address should appear in the Network Address section.
4. Click Apply.
5. You can verify that the installed optional features have been enabled: click the Device Settings tab
and then scroll down to view the Installable Options section.
6. Click OK to close the Properties dialog box.
Enabling Optional Features for a USB Cable-Connected Printer
1. Navigate to your computer’s list of printers:
• For Windows XP, click Start > Settings > Printers and Faxes.
• For Windows Vista, click Start > Control Panel > Hardware and Sound > Printers.
• For Windows 2000 and Windows Server 2003, click Start > Settings > Printers.
• For Windows Server 2008, click Start > Settings > Printers.
2. In the list of printers, right-click the Phaser 6140 PS printer and select Properties.
3. In the Properties dialog box, click the Device Settings tab.
4. Click the plus sign (+) to the left of Installable Options to expand and see the list of optional
features.