Filter
Top Products
Control Panel Menus
Phaser 6140 Color Laser Printer
User Guide
104
PCL Setup Menu
Use this menu to configure settings for the Printer Command Language (PCL). The printer’s PCL driver
is used for applications requiring PCL. For PCL printer driver options, see Printing Options for Windows
PCL Driver on page 68.
Drum Refresh Helps improve imaging unit performance after overexposure to light.
Init Print Meter Initialize Print Meter. Resets the Print Meter.
Initialize NVM Resets the settings in the nonvolatile memory (NVM), except for the
network settings, to their defaults. NVM is memory that stores the printer
settings even after the power is turned off. After selecting this option and
restarting the printer, all the menu parameters are reset to their default
values.
Notes:
• You cannot set this during printing.
• After changing this setting, turn off the printer and then turn
it on again to activate the change.
Clear Storage Deletes documents stored in the printer’s RAM.
Reset Fuser Resets the fuser life counter to the starting point (0).
Item Description
Paper Tray Specifies the paper tray to use when the Paper Tray setting in the PCL
printer driver is set to Auto Select.
• Auto (default)
• Tray 1
• Tray 2 (optional; if installed)
• Manual Feed Slot
Paper Size Specifies the default paper size to print.
Orientation Specifies the default paper orientation:
• Portrait (default)
• Landscape
2-Sided Specifies 2-sided printing settings:
• 2-Sided Print: Specifies whether to perform 2-sided printing. The
default is Off.
• Binding Edge: Specifies the binding direction from Flip Long Edge
(default) or Flip Short Edge.
Font Specifies the font to use. The default font is Courier.
Item Description