Filter
Top Products
Xerox FaxCentre F12 User Guide Page 5-49
Fax
Setting Prefix Dial Number
You can set the prefix dial number up to 5 digits. This dial
number is to dial first before any autodial number is started. It
is useful to access PABX exchange.
Ø Press [Menu/Exit] and then repeatedly until ‘7:FAX
SETUP’ appears on the display, then press [Enter].
Ø Press the or navigation keys repeatedly until
‘PREFIX DIAL NO’ is displayed on the lower line, then press
[Enter].
Ø Enter the desired number using the number keypad, then
press [Enter].
Ø To return to Standby mode, press [Stop/Clear].
Setting Fax Duplex
With this option enabled, you can print 2-sided fax pages. You
can select LONG EDGE or SHORT EDGE according to the
desired binding orientation. Setting OFF turns the feature off.
Ø Press [Menu/Exit] and then repeatedly until ‘7:FAX
SETUP’ appears on the display, then press [Enter].
Ø Press the or navigation keys repeatedly until ‘FAX
DUPLEX’ is displayed on the lower line, then press [Enter].
Ø Press the or navigation keys repeatedly to select
the desired status, then press [Enter] to save the selection.
You can choose to turn duplex OFF or to duplex on the
LONG EDGE or the SHORT EDGE of the paper
Ø To return to Standby mode, press [Stop/Clear].
Clearing Memory
You can selectively clear information stored in your
FaxCentre’s memory. See “Clearing Memory” on page 9-11.