Filter
Top Products
Xerox FaxCentre F12 User Guide Page 9-3
System Setup
REDIAL INTERVAL FaxCentre F12 can automatically redial a remote fax machine if it
was busy. Intervals from 1 to 15 minutes can be entered.
TIMEOUT With this option, you can set the timeout value for the machine to
return to a default state, by following these steps:
Ø Select the required default state on the control panel (for example
copy mode, 5 copies)
Ø Select the System Setup menu option and scroll to timeout.
Ø Select a Timeout value for 15, 30, 60, 180 seconds or OFF.
Ø Exit the menu system.
REDIALS Specifies the number of redial attempts (from 0 to 9) the FaxCentre
F12 will attempt.
ANSWER ON RINGS Specifies the number of times FaxCentre F12 rings (1 – 7) before
answering an incoming call.
SEND FROM MEM When enabled, all fax transmission documents are automatically
scanned into memory. It will not be necessary to wait until
documents in the Automatic Document Feeder are sent before you
can send or store other fax jobs.
LOCAL ID When enabled, the FaxCentre F12 automatically prints the page
number and date and time of reception at the bottom of each page
of a received document.
RINGER VOLUME You can set the required ringer volume. There are 10 levels
available. You’ll hear the Entered volume and the display will show
the level. Setting to the left end turns the ringer off. The machine will
work normally even if the ringer is set to off.
ALARM SOUND With this option set to ON, the alarm tone sounds when an error
occurs or fax communication ends.
KEY SOUND With this option set to ON, a key tone sounds each time any key is
pressed.
SPK CONTROL You can set the speaker to ON, OFF or COM. With this option set to
COM, the speaker is on until the remote machine answers.
LANGUAGE You can choose which language to display on the LCD. The options
available are English and French.
Option Description