Filter
Top Products
Xerox FaxCentre F12 User Guide Page 5-5
Fax
Adjusting Document Settings
When sending typical text based documents, the default
document settings produce good results.
However, if you send documents that are of poor quality, or
contain photographs, you can adjust the following features to
ensure a higher quality.
Resolution
NOTE: The SUPER FINE resolution is not available if the
SEND FROM MEM option is set to ’ON’. If the SEND FROM
MEM option is set to ’ON’, the SUPER FINE resolution is
automatically converted to the FINE resolution when the
document is scanned into memory.
If the FaxCentre is set to the SUPER FINE resolution and the
remote fax machine does not support the SUPER FINE
resolution, your FaxCentre will transmit using the highest
resolution mode supported by the remote fax machine.
Mode Recommended for:
STANDARD Documents with normal sized characters.
FINE Documents containing small characters or thin lines, or for sending
documents printed using a dot-matrix printer.
SUPER FINE Documents containing extremely fine detail. Super Fine mode is
enabled only if the remote machine also supports Super Fine resolu-
tion. (See the Note below.)
Ø Make sure that a document is
loaded in the ADF.
Ø Press [Resolution] to increase
sharpness and clarity.
By pressing [Resolution]
repeatedly or using the
navigation buttons, you can
choose between STANDARD,
FINE, and SUPER FINE.
Ø Press [Enter].
Resolution Key