Filter
Top Products
Xerox FaxCentre F12 User Guide Page 8-5
Basic Troubleshooting
Fuser Area
If jammed in the fuser area, ‘PAPER JAM 1’ appears in the
display.
WARNING:The fuser area is hot. Take care when
removing paper from the machine.
CAUTION: Do not pull paper up through the fusing unit.
Unfused toner may adhere in the area, resulting in
smudged copies.
Ø
I
nser
t
th
e paper casse
tt
e.
Lower the rear part of the
cassette to align the rear
edge to the corresponding
slot of the machine, then
insert it completely.
Ø
P
ress
th
e re
l
ease
l
a
t
c
h
t
o
open the side cover.
Ø Pull down on the fuser lever
as shown below. This will
release pressure on the
paper.
Ø If paper is not seen in this
area, skip to the Exit Area.