Filter
Top Products
Xerox FaxCentre F12 User Guide Page 5-9
Fax
If the SEND FROM MEM feature is set to ON (default setting),
the document is scanned into memory and the display shows
the memory capacity and the number of pages being stored in
memory.
NOTE: If you want to cancel the fax, press [Stop/Clear] at any
time during the transmission. The display will show:
START=RESUME
STOP=CANCEL
Press [Start] to cancel the fax. This may take several seconds
to complete.
Ø Enter the remote fax phone
number using the number
keypad.
To enter the number, you can
also press a one-touch button
or press [Speed Dial] and enter
a speed dial number including a
group dial number. For details,
see “Automatic Dialing” on
page 5-18.
Ø Press [Start].
NOTE: You do not need to press
[Start] if you are using a one-
touch button to enter the number.
Numeric Keypad
Start Key