Filter
Top Products
Xerox FaxCentre F12 User Guide Page 6-3
Scan
Scanning Procedure
This section explains advanced scanning with a Twain
compliant application program.
NOTE: Refer to the documentation provided by the
application manufacturer to see how to scan acquire a
scanned image.
Ø Load the Originals
You can load up to 50 documents in one job. Ensure
documents are in good condition, and that all staples
and paper clips have been removed. Ensure any glue,
ink or correction fluid on the paper is completely dry
before loading the documents.
Originals should be between 45 g/m
2
and 105 g/m
2
(12.5 lb and 28 lb), and between B5 (182 x 257 mm / 7
x 10 inch) and Legal size (216 x 356 mm / 8.5 x 14 inch).
Ø Remove all staples and paper
clips before placing the
originals into the document
feeder.
Ø If necessary, adjust the sliding
document guides to the paper
size required.
Ø Insert the originals neatly into
the document feeder, face
down.
The first page should be on
the bottom with the headings
towards the left or back of the
machine.
Ø Align the stack to the left and
against the rear edge of the
document feeder tray. Adjust
the guides to just touch the
edges of the originals.
Document
guides