Filter
Top Products
Xerox FaxCentre F12 User Guide Page 5-11
Fax
NOTE: If you want to cancel the fax, press [Stop/Clear] at any
time during the transmission. The display will show:
START=RESUME
STOP=CANCEL
Press [Start] to cancel the fax. This may take several seconds
to complete.
Confirming Transmission
When the last page of your document has been sent
successfully, the FaxCentre beeps and returns to Standby
mode.
If something went wrong during your fax transmission, an error
message appears on the LCD display. For a listing of error
messages and their meanings, see “LCD Error Messages” on
page 8-12. If you receive an error message, press [Stop/Clear]
to clear the message and try to send the document again.
Ø Press [Manual Dial] on the
control panel. You hear a dial
tone if the telephone line is
correctly connected.
Ø Enter the remote fax phone
number using the number
keypad.
To enter the number, you can
also press a one-touch button
or press [Speed Dial] and enter
a speed dial number including a
group dial number. For details,
see “Automatic Dialing” on
page 5-18.
Ø When you hear the high-
pitched fax signal of the other
party’s fax machine, press
[Start] or [Enter].
Manual Dial Key
Start Key
Numeric Keypad