Filter
Top Products
Common Error Messages
Chapter 5: Troubleshooting ❖ 5-21
Change tray
type size
The printer requests a different print material than what is loaded in the tray or
set in the Paper Size or Paper Type menus.
Line 1 displays the paper source tray, which is one of the following items:
•
Tray 1
•
Tray 2
Tray 2 only displays if the optional Tray 2 is installed.
Line 2 displays one of the following items:
• A user-defined name, for custom type 1 through 3. The name is truncated to
16 characters.
•
type size
: The requested type is a type other than a custom type. The
type name is truncated to 16 characters. The requested size of paper or
envelope displays. The size name is truncated to 16 characters.
When this message displays you can:
• Load the requested size and type in the source. The printer automatically
clears the message and continues printing the job.
• Press
OK
to clear the message, print the portion of the job already in
memory, and begin collating the rest of the job.
• See
“To Cancel the Current Print Job”
(page 5-24).
• See
“To Reset the Printer and Cancel the Print Job”
(page 5-25).
Table 5.3 Common error messages
(continued)
Message Cause/Action
Table 5-3 Page 4 of 6