Filter
Top Products
Flash Memory
Appendix C: Printer Options ❖ C-11
Installing a Flash
Memory SIMM
Before you install a flash memory option, follow the steps
in “
Accessing the System Board from the Rear”
in the
previous section.
To install a flash memory option:
A memory SIMM is easily damaged by static electricity.
Touch something metal to discharge any static
electricity before you touch it.
1
Locate and remove the code SIMM card from the printer
system board.
You reinstall the code SIMM card after the flash
memory option is installed.
2
Locate the flash memory connector on the printer system
board. It is the connector behind the code SIMM
connector.
3
Unpack the new flash memory SIMM. Avoid touching the
connection points along the edge. (Save the packaging.)