Filter
Top Products
Tray Linking
Chapter 2: Loading Print Media ❖ 2-15
Tray Linking
Tray linking is a printer feature used when the optional
Tray 2 is installed. Tray linking enables the automatic
linking feature for the paper sources, allowing you to
print from one paper source should the other one become
empty.
For example, if you have letter-size print material loaded
in both the standard input tray and Tray 2, and the
standard input tray becomes empty, the printer selects
print material from Tray 2.
If you load the same size print material in each paper source,
make sure the print material is all the same type. If you use
different print material in the paper sources, each source with a
different print material must have the Paper Type set to a
unique value to disable the automatic linking feature.
For example, if you did not make sure all paper sources have
the same type when they are linked, you could send a report to
print and if you have letterhead paper loaded into one paper
source, you could print the report on letterhead paper.