Filter
Top Products
Loading Paper
Chapter 2: Loading Print Media ❖ 2-13
4
Place the envelopes with the print side facing you and the
long side aligned against the right side of Tray 2. The
stamp side faces up with the stamp corner facing down.
Do not overfill Tray 2 because the print material
may not feed correctly through the printer or you
may get a paper jam. Do not feed a stamped
envelope into the printer. The stamp is shown for
orientation purposes only.
5
Slide the print material as far as it will go into Tray 2. If
you do not insert the print material far enough into
Tray 2, it may skew or not feed at all.
Use the paper length indicators printed on the top
right-hand side of the tray to determine that the
print material is fully inserted into Tray 2.
6
Squeeze the tab on the width guide lever and slide the
width guide lever to the right until it touches the edge of
the print material.
If you are not using large-size paper, go to Step 8 on
page 2-14.