Filter
Top Products
Option Card Installation
C-22 ❖ DocuPrint C20/NC20 User Guide
Installing an
Option Card
Complete the following steps to install either the Tri-Port
Interface card or the Hard Disk option:
1
Remove the two screws from the metal plate covering the
opening for the cable connector.
Save the screws.
2
Grasp the tab on the end of the metal plate and pull the
plate straight out. Discard the metal plate.
3
Unpack the option card. See the packing materials.
To complete the following installation
instructions, you should be at eye level with the
printer option card slot.
4
Locate the option card connector on the printer system
board. It is located inside the printer. You can access it
through the option card slot.
5
Locate the card guide inside the option card slot on the
left side of the slot.