Filter
Top Products
Option Card Installation
Appendix C: Printer Options ❖ C-21
Option Card Installation
Follow the steps in this section to install either of the
following options:
• Tri-Port Interface Card
•Hard Disk.
Accessing the System
Board from the Right
Complete the following steps before you install the
option card:
An option card is easily damaged by static electricity.
Touch something metal to discharge any static
electricity before you touch it.
1
Unplug the printer power cord.
2
Disconnect all cables from the back of the printer.
3
Push on the thumb indention, located on the right side of
the system board access cover, and slide the cover to the
right until it releases.
4
Pull the cover away from the printer.
5
Continue with the section
“Installing an Option Card”
on
the next page.