Filter
Top Products
Printer Memory
Appendix C: Printer Options ❖ C-7
3
Hold the memory SIMM with the connection points
pointing toward the connector and position the notch as
shown.
4
Insert the memory SIMM all the way into the connector
at a 45° angle, and rotate it
down
until it snaps into place.
You can hear the memory option click into place.
5
Verify that both metal clips on the connector are fastened,
and that the two pins on each end of the connector are
pushed through the holes on the memory option.
6
Continue with the section
“Closing the System Board from
the Front”
on the next page
.