Filter
Top Products
Input Tray 2
Appendix C: Printer Options ❖ C-25
Input Tray 2
Tray 2 is shipped in two pieces, the paper tray and the
paper support. The following sections give complete
instructions for attaching the paper tray and the paper
support.
Installing the
Paper Tray
1
Make sure you have all the items shown. If any items are
missing or damaged, contact your Xerox representative or
authorized Xerox dealer. Slide the system board access
cover to the left until it snaps into place.
2
Unplug the printer power cord.
3
Remove the rear cover.
A
Press down on the two tabs located at the top of the
rear cover and pull the cover away from the printer.
B
Store the rear cover for future use.
4
Locate the slots on both sides on the back of the printer.