Filter
Top Products
Common Error Messages
5-22 ❖ DocuPrint C20/NC20 User Guide
Load tray
type size
The printer is trying to feed print material from a source it detects is empty.
Line 1 displays the paper source tray, which is one of the following items:
•
Tray 1
•
Tray 2
Tray 2 only displays if the optional Tray 2 is installed.
Line 2 displays one of the following items:
• A user-defined name, for custom type 1 through 3. The name is truncated to
16 characters.
•
type size
: The requested type is a type other than a custom type. The
type name is truncated to 16 characters. The requested size of paper or
envelope displays. The size name is truncated to 16 characters.
When this message displays you can:
• Load the requested size and type in the source. The printer automatically
clears the message and continues printing the job.
• Press
OK
to clear the message and continue printing on the print material
installed in the paper source.
• See
“To Cancel the Current Print Job”
(page 5-24).
• See
“To Reset the Printer and Cancel the Print Job”
(page 5-25).
Table 5.3 Common error messages
(continued)
Message Cause/Action
Table 5-3 Page 5 of 6