Filter
Top Products
Printer Memory
C-8 ❖ DocuPrint C20/NC20 User Guide
Closing the System
Board from the Front
Complete the following steps after you have installed the
printer memory
1
Reinstall the system board access cover.
A
While holding the cover at the angle shown, align the
tabs on the back of the access cover with the slots
located at the rear of the access opening.
B
Push down the top of the access cover until it snaps
into place.
2
Reattach the input tray and output bin.
If you need help, see the Quick Installation Guide.
3
Reconnect all cables on the back of the printer.
4
Reconnect the power cord to the printer and a properly
grounded electrical outlet.
5
Make sure the
Ready
message appears on the Control
Panel display. If an error message appears, see Chapter 5
in the System Administrator Guide.
To verify that the memory card option is installed
properly, see Chapter 3,
Printing Menu Settings
.