Filter
Top Products
Option Card Installation
Appendix C: Printer Options ❖ C-23
6
Align the left side of the option card with the track inside
the card guide.
Make sure the connectors on the right side of the
option card clear the cable connector opening.
7
Push the card straight into the printer.
The option card automatically shifts toward the right as
you push it in, aligning the right side of the option card
with the cable connector opening.
The connector on the option card fits firmly into the
option card connector.
The cable connectors on the side of the Tri-Port
interface option card must fit through the cable
connector opening on the back of the printer.
8
Insert the two screws saved when you removed the metal
plate (or the extra screws shipped with the card) into the
holes on either side of the cable connector opening on the
back of the printer.
9
Gently tighten the screws to secure the card to the system
board.
10
Continue with
“Closing the System Board from the Right”
on
the next page.