Filter
Top Products
Option Card Installation
C-24 ❖ DocuPrint C20/NC20 User Guide
Closing the System
Board from the Right
Complete the following steps after you install an option
card:
1
Insert the four tabs on the top of the system board access
cover into the slots on the printer as illustrated.
2
Slide the system board access cover to the left until it
snaps into place.
3
Reconnect all cables to the back of the printer.
4
Reconnect the power cord to the printer and a properly
grounded electrical outlet.
5
Verify that the Ready message appears on the Control
Panel display.
If an error message appears, see Chapter 5 in the
System
Administrator Guide
.
To verify that the option card is installed properly,
see Chapter 3
, Printing Menu Settings
.