Filter
Top Products
Input Tray 2
Appendix C: Printer Options ❖ C-27
Attaching the
Paper Support
1
Locate the slot on the back of the paper tray.
2
Align the tab on the back of the paper support with the
slot on the paper tray.
3
Push straight down on the paper support until it stops.
4
Reconnect all cables to the back of the printer.
5
Reconnect the power cord to the printer and a properly
grounded electrical outlet.
6
Make sure the Ready status message appears on the
Control Panel display.
If an error message appears, see Chapter 5 in the
System
Administrator Guide
.
To verify that Tray 2 is installed properly, see
Chapter 3,
Printing Menu Settings
.