Filter
Top Products
Introduction
INDICATOR LIGHT SUMMARY
980541-001 Rev. A P640i Card Printer User Guide 7
INDICATOR LIGHT SUMMARY
Depending on the condition they are reporting, the three indicator lights, READY, MEDIA and
ALARM, can be in one of three states: Off, On (steady), or Flashing.
The READY indicator is bi-colored. Its two color channels, green and yellow, function
independently.
READY indicator
Green = Ready to print, or printer busy.
Yellow = Laminator not at operating temperature.
MEDIA indicator
Normally Off.
On = Any media outage.
ALARM indicator
Normally Off.
What the Indicator Lights Tell You
READY MEDIA ALARM
Printer Status
GREEN YELLOW ORANGE RED
Ready to print
Printer busy
Laminator heating up, but not yet at operating temperature
Laminator heaters in sleep mode (when not in use, the heaters cool at 1oF per minute)
Printhead temperature error.
No cards in magazine, color ribbon out, cleaning tape out, laminator cassette(s) out.
Mag encoding write failure
Serious error conditions, including: MAIN COVER OPEN, Laminator too hot, card
transport stalled, card not seated properly, mag encoding verification error, head lift
failure, ribbon jam, card jam (any location), card missing (any location), no gap be-
tween laminator patches.
= light on = light flashing