Filter
Top Products
6287 ULTRA Users ManualPage 9-6
Trigger 1 (the cent sign ¢ is the default) - exclamation point (!) - translate
table # - all 256 hexadecimal data pairs in the table, in order. The following
example illustrates downloading the contents of Translate Table 1, where
Trigger 1 is the default cent sign (¢) and where xx...xx represents the 256
values of a translate table:
¢!1xx...xx
Downloading a Single Translate Table Value
Downloading a change to a single translate table position value will use the
following format:
Trigger 1 (the cent sign ¢ is the default) - exclamation point (!) - translate
table # - hexadecimal position # - hexadecimal value - semicolon (;). The
following example illustrates changing the value of Translate Table 1,
position 16 to a value of 99h, where Trigger 1 is the default cent sign (¢):
¢!11699;
Downloading a Partial Translate Table
Downloading a partial change to a translate table will use the following
format:
Trigger 1 (the cent sign ¢ is the default) - exclamation point (!) - translate
table # - hexadecimal offset position # - hexadecimal values - semicolon (;).
Commas (,) must be used to separate each hexadecimal value to be
downloaded. The following example illustrates changing the value of all
lowercase letters in Translate Table 1 to uppercase letters, where Trigger 1
is the default cent sign (¢):
¢!18041,42,43,44,45,46,47,48,49,4A,4B,4C,4D,4E,4F,50,51,52,53,54,55,56,57,58,59,5A;
The offset position number indicates the location in the table where the
changes to the translate table will begin (location 80 was used in the
example above). Any values in the character string after the offset position
value will replace subsequent values in consecutive order in the table.
Downloading will end when a semicolon (;) is received.