Filter
Top Products
Page 2-13INSTALLATION
6287 ULTRA Power Up
Power on the printer. After the printer completes its power on initialization
sequence, verify that it is on line and ready to receive and print data. If
necessary, refer to the printer users manual for detailed information.
Power on the alternate host, if using an alternate host.
Power on the ULTRA by pushing down the on/off switch. The following
Status Indicator Lights should all be on: POWER, CU SIGNAL and
PRINTER READY. All other lights should be off.
The ULTRA is shipped with its dip switches and configuration options set
for the most common environments. If the factory default settings are
appropriate for the users environment, the ULTRA is ready to be used for
printing.
If the users environment differs from the one for which the ULTRA is
configured, the user may need to refer to the following chapters on dip
switch settings, configuration options and the other user-changeable
features of the ULTRA.